Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the rear headlight bulb of a Toyota Corolla?

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Tail light bulb

To replace the rear headlight bulb of a Toyota Corolla, start by opening the trunk to access the rear area of the light. Remove the panel or inner lining of the compartment, which may be secured with clips or screws, to reach the back of the headlight. Once you have uncovered the optical group, locate the bulb holder, which is usually inserted in the back of the headlight. Rotate it counterclockwise to gently remove it. After removing the bulb holder, take out the defective bulb by pulling it slightly or twisting it, depending on the type. Insert the new compatible bulb, being careful not to touch the glass directly with your fingers to avoid damaging it or reducing its lifespan. Reinstall the bulb holder in the optical group by rotating it clockwise until it locks securely. Replace the inner lining and make sure it is securely attached. Finally, turn on the lights to verify that the new bulb is working correctly, ensuring that the installation was successful.

Posted on 24 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Toyota Corolla (2013-2019 / MK 4, E170, E160) To replace the rear light bulb of the Toyota Corolla, you need to detach the two pins located inside the boot, accessible by opening the rear hatch. …
Toyota Corolla (2000-2007 / MK 2) To replace the rear light bulb on a Toyota Corolla Verso, open the rear tailgate to access the components inside the boot. On the side of the boot, n…
Toyota Corolla (2006-2013 / MK 3) In this mini guide, discover how to correctly replace the rear light bulb of your Toyota Corolla. If you follow the instructions carefully, you will …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos