Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear hatch seal of the Toyota Aygo

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014

In this short guide we will see the instructions that will allow us to disassemble and replace the seal of the rear door of the Toyota Aygo, but also of the Peugeot 107 and Citroen C1. First, we open the rear door of the trunk and start removing the old seal on the sides of the body of the luggage compartment; then we clean the area with a degreasing product before installing the new seal, as shown in the video. Once the new seal is correctly installed, we verify the correct closing of the rear door!

Posted on 23 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Open and Close the Boot of a Toyota Aygo
How to Open and Close the Boot of a Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) This guide will show you how to open and close the boot of the Toyota Aygo. First, move to the rear of the vehicle and press the button located under…
Replacement of the rear light of the Toyota Aygo
Replacement of the rear light of the Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) Let's briefly see the instructions that will allow us to disassemble and replace the rear taillight of the Toyota Aygo, in simple steps. First, we op…
Replacement of the rear headlight bulbs of the Toyota Aygo
Replacement of the rear headlight bulbs of the Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) The steps outlined in this guide will show us how to disassemble and replace the rear headlight bulbs of the Toyota Aygo. First, we open the rear hat…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos