Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the electronic traction control in the Toyota Tundra pick-up?

Model: Toyota Tundra Xk50 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, we can see how to deactivate the electronic traction control in the Toyota Tundra pick-up, a very simple and quick operation. This system should only be deactivated in case of need, for example on a sandy surface, and only if you have the necessary skills.

First of all, let's go inside the cabin, then insert the key and start the vehicle. Next, locate the button depicting a car in a skid located on the lower right of the dashboard, press and hold it for three seconds and repeat the operation.

To reactivate the system, simply press the button a third time.


Posted on 5 September 2025 by ScegliAuto


Related tutorials

How to deactivate the traction control (TRC) on the Toyota Tundra
How to deactivate the traction control (TRC) on the Toyota Tundra
Toyota Tundra (2007-2021 / Xk50) In this guide, we will see the instructions that will allow us to deactivate the traction control of the Toyota Tundra; it is recommended not to disa…
How to Disable Traction Control in a Toyota Tundra?
How to Disable Traction Control in a Toyota Tundra?
Toyota Tundra (2007-2021 / Xk50) To disable the traction control in a Toyota Tundra, turn on the ignition so you can use the control buttons located next to the steering column: here…
How do you deactivate the traction control of the Toyota Tundra?
How do you deactivate the traction control of the Toyota Tundra?
Toyota Tundra (2007-2021 / Xk50) To deactivate the traction control of the Toyota Tundra, you will need to insert the ignition key into the corresponding slot, in order to turn on th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos