Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the radio from the 2017 Toyota CH R

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Car stereo

See other generations:
Video tutorial

The following video tutorial shows how to remove the radio from the 2017 Toyota CH R. We insert a plastic lever between the dashboard and the edge of the frame around the central screen of the radio and apply slight pressure at points not covered by buttons to gradually remove all edges of the dashboard, being careful not to break the internal clips.

After removing the frame, we unscrew the four screws on the top and bottom using a Torx key. We then grab the radio and remove it from its slot, slightly turning the unit to disconnect the power and ignition connector, the speaker connector, and the radio antenna cable.

We then remove the radio and proceed with the replacement if necessary; the assembly follows the reverse procedure.


Posted on 28 October 2025 by ScegliAuto


Related tutorials

How to Activate DAB Mode on a Toyota C-HR Radio
How to Activate DAB Mode on a Toyota C-HR Radio
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Before you can start, sit in the driver's seat of your Toyota C-HR. Begin by turning on the onboard computer and the radio by pressing the correspond…
How to Replace the Central Unit and Display of the Toyota CH-R
How to Replace the Central Unit and Display of the Toyota CH-R
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) In this video tutorial, you will learn how to remove and replace the central display or multimedia system/dashboard computer of the Toyota CH-R. Firs…
How to Remove the Dashboard of the Toyota CH-R
How to Remove the Dashboard of the Toyota CH-R
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) In today's video, we will see how to completely remove the dashboard of the Toyota CH-R. First, remove the glove compartment from its place. Next, ta…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos