Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning light on the Toyota RAV4.

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part:

In this guide, we will see the instructions that will allow us to reset the tire pressure warning light on the Toyota RAV4 using an OBD scanner. Before performing the reset of the TPMS sensors, it is necessary for all four tires to be at the correct operating pressure. So, let's get in the vehicle and start the ignition; then, we will connect our diagnostic tool to the OBD port and proceed to detect the new pressures, as shown in the video. At this point, we will reset the TPMS directly from the tool.

Posted on 14 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light on the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) The ignition of the tire pressure warning light indicates a possible puncture or loss of pressure; let's see how to reset the TPMS light on the Toyot…
How to reset the tire pressure light on the Toyota RAV4
How to reset the tire pressure light on the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) When the tire pressure warning appears on the instrument panel, it is likely that there is a loss of pressure in one or more tires; let's see how to …
How to Reset the Tyre Pressure Light in a Toyota RAV4
How to Reset the Tyre Pressure Light in a Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) In this video tutorial, you can see how to reset the tyre pressure light in a Toyota RAV4 by following a few simple steps: the first thing to do if y…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos