|
Do it yourself
| |||
| ||||
How to Reset the Tyre Pressure Light on a Toyota Corolla?
Model: Toyota Corolla
E210, MK 5
- Years 2019-2026
You can reset the tyre pressure light displayed on the instrument panel of the Toyota Corolla by first inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver’s door pillar. Once the tyres are inflated, you can turn on the instrument panel and navigate through the menu using the arrows on the left side of the steering wheel: this way, you can select the "TPWS" option and then the "Reset" option, turning off the light completely.
Posted on 15 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Toyota Corolla
(2000-2007 /
MK 2)
The following steps will show us how to reset the tire pressure warning on the Toyota Corolla; before resetting the TPMS sensors, it is necessary tha…
Toyota Corolla
(2013-2019 /
E160, MK 4, E170)
Today's instructions will show us how to reset the tire pressure warning on the Toyota Corolla; before resetting the TPMS sensors, make sure all four…
Toyota Corolla
(2013-2019 /
E160, MK 4, E170)
Today we will see the procedure and instructions for resetting the tire pressure warning of the Toyota Corolla; before resetting the TPMS sensors, it…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.066
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
