Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Outside Temperature Sensor on a Toyota 4Runner

Model: Toyota 4runner N210 - Years 2002-2009
Part: Checks and maintenance

In this tutorial, you will see how to replace the outside temperature sensor on a Toyota 4Runner, a very simple and quick operation. First, ensure that the instrument cluster is off for safety. Then, open the hood and locate the sensor, which is situated in front of the radiator, right next to the horn. Next, disconnect the connector, release the retaining clip using a screwdriver, and separate the sensor from the clip. At this point, simply install the new part and reassemble everything by following the reverse procedure.

Posted on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box in the Toyota 4Runner
Where to Find the Fuse Box in the Toyota 4Runner
Toyota 4runner (2002-2009 / N210) If you are experiencing issues with one or more electrical components in your Toyota 4Runner, don't worry because you can directly address them throu…
How to Replace the Cabin Air Filter on a Toyota 4Runner?
How to Replace the Cabin Air Filter on a Toyota 4Runner?
Toyota 4runner (2010-2024 / N280) To replace the cabin air filter on a Toyota 4Runner, open the glove compartment located on the passenger side. Inside the glove compartment, there wi…
How to Replace the Headlight Bulb on a Toyota 4Runner
How to Replace the Headlight Bulb on a Toyota 4Runner
Toyota 4runner (1996-2002 / N180) To replace the headlight bulb on a Toyota 4Runner, open the hood to access the back of the headlight by removing the circular plastic cover. Once thi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos