Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Inner Door Panel of the Toyota RAV-4 MK5

Model: Toyota Rav 4 MK 5, Xa50 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Door trim panel

See other generations:
Video tutorial

For this job, you need a few tools: a plastic lever and a cross-head screwdriver. Start by prying off the plastic cover behind the internal handle; behind it, you will find a cross-head screw which you will remove.

At the bottom of the door, where the window switch panel is located, pry off the edges of the cover to detach it. Behind, there are two electrical connectors, thus separating the switches from the panel. There is a plastic piece shaped like an inverted "L" that goes from the switch panel upwards (behind the handle).

Start from the top: insert the flat screwdriver to create a small gap. Once pried, gently pull outwards: beneath this trim, there is another screw. As with the top. Now that all screws are removed, pull the door trim from the bottom, detach the securing clips, and lift the panel upwards.

Disconnect the internal handle (it has cables: they do not need to be removed individually, just pull the handle to one side and it will come out whole from its housing.


Posted on 21 May 2026 by ScegliAuto


Related tutorials

Toyota Rav 4 (2019-2026 / MK 5, Xa50) In this short and simple guide, you will learn how to remove and replace the external door handle of the front door of the Toyota RAV 4. First, open …
Toyota Rav 4 (2019-2026 / MK 5, Xa50) Below are the instructions that will allow you to remove and replace the rear door panel on the Toyota RAV 4 in simple and quick steps. First, open t…
Toyota Rav 4 (2000-2006 / MK 2, Xa20) To replace the door panel on the Toyota RAV4, first remove the panels located at the door pillars. Next, unscrew the screws positioned on the right s…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos