|
Do it yourself
| |||
| ||||
Full Service and Reset for the Toyota Yaris Cross
Model: Toyota Yaris Cross
MK 1
- Years 2020-2026
Let's see how to perform routine maintenance on a Toyota Yaris Cross: the oil filter is located in the engine bay at the top left, under a plastic cover; place a container underneath to catch the oil that will come out. Unscrew it with a strap wrench, clean the seat, lubricate the seal with clean oil, and screw the seal in by hand, then tighten by 3/4 of a turn. Meanwhile, drain the engine oil from the front of the oil sump. Position the collection container under the drain plug (dispose of it properly at an authorised centre), unscrew the plug and let it drain. Replace the plug and seal and screw the plug back on, tightening it to 30/40 Nm. Refill the oil through the upper filler cap, start the engine for a couple of minutes, then turn off and check the level with the dipstick, adding oil until it reaches the max level. The engine must be in "ready" mode to circulate the oil before draining. To reset the warning light, turn on the ignition, use the buttons to the left of the steering wheel, select "vehicle settings" and scroll to "oil change". Press and hold the "ok" button and select "reset data". Wait for the message "reset completed".
Posted on 24 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Toyota Yaris Cross
(2020-2026 /
MK 1)
In this tutorial we can see how to reset the oil service in the Toyota Yaris Cross, an extremely simple and quick operation, to be carried out only o…
Toyota Yaris Cross
(2020-2026 /
MK 1)
You can completely reset the Service light on the Toyota Yaris Cross by inserting the ignition key into the ignition switch to turn on the instrument…
Toyota Yaris Cross
(2020-2026 /
MK 1)
If you own a Toyota Yaris Cross Hybrid and want to learn how to manually reset the service light that illuminates on the instrument panel, just read …
Other guides you may be interested in
|
How to Repair the Key Spring of the Peugeot 207?
Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.975
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |