Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Steering Head on Toyota Aygo

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
Video tutorial

Hearing strange noises from the front of the car? The steering head may be damaged; let's see how to remove it. Position the car on a column lift and raise it to a comfortable height for working. Remove the wheel bolts with a socket spanner and take the wheel off. Next, use a socket spanner to remove the bolts from the steering head.

Remove the bolts located under the steering head and the stabiliser bar. Pull the steering head away from the vehicle body. Fit the new steering head, then screw it in place.

Refit the wheel with the bolts and lower the car to the ground. Test the installed part.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

How to Replace the Power Steering Control Unit on a Toyota Aygo?
How to Replace the Power Steering Control Unit on a Toyota Aygo?
Toyota Aygo (2005-2014 / Ab10, MK 1) To replace the power steering control unit on a Toyota Aygo, loosen the screws securing the plastic covers around the steering column. Once these scr…
Replacing the Track Rod Ends on a Toyota Aygo
Replacing the Track Rod Ends on a Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) In this video tutorial, you will see how to remove and replace the track rod ends on a first-generation Toyota Aygo. First, loosen the bolts of the f…
Replacing the Cabin Air Filter on a Toyota Aygo
Replacing the Cabin Air Filter on a Toyota Aygo
Toyota Aygo (2021-2026 / MK 3, Aygo X) In this brief and simple guide, you will see how to replace the cabin air filter on a Toyota Aygo. First, get inside the vehicle and start by opening…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos