Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery on Toyota Auris

Model: Toyota Auris E150 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Key

See other generations:
This video is currently unavailable

If pressing the buttons on the remote key does not activate the door locks, the remote battery may be flat: it is a CR2032 model and the replacement is very simple. Start by pressing the side button on the remote (the one marked PUSH) to extract the mechanical key (also known as the blade) and use the same blade to pry in the designated slot to separate the shells.

At this point, you will notice the battery cover located between the transparent shells of the remote's electronic board; remove the cover, take out the old battery and insert the new one, ensuring the correct polarity, then close everything by reversing the steps.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on a Toyota Auris?
How to Replace the Front Headlight Bulb on a Toyota Auris?
Toyota Auris (2007-2012 / E150) You can replace the front headlight bulb on a Toyota Auris by opening the bonnet to access the components in the engine bay: here you will find the i…
How to Replace the Remote Battery in a Toyota Auris?
How to Replace the Remote Battery in a Toyota Auris?
Toyota Auris (2007-2012 / E150) To replace the battery in the remote for the Toyota Auris, use a tool to pry open the bottom of the device. Once this is done, you can open the remot…
How to Replace the Rear Number Plate Bulb on a Toyota Auris?
How to Replace the Rear Number Plate Bulb on a Toyota Auris?
Toyota Auris (2012-2018 / E180) Good morning, to replace the rear number plate bulb on your Toyota Auris, start by opening the tailgate. Now, locate the bulb holder near the number …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos