Do it yourself
Frequently asked questions about cars and motorcycles

Battery replacement on Toyota Yaris

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Battery

Let's replace the damaged battery on a Toyota Yaris, see how it is disassembled. We open the car door and pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front bonnet, releasing the locking lever of the same with the fingers, then we put it in safety. We will find the battery at the top right; we disassemble the clamping pins of the battery terminals, then, we disassemble the metal bar. We remove the battery from the engine compartment and replace it with a new one (same voltage). We close the bonnet at the end of the maintenance. We test the new battery.


Posted on 3 December 2023 by ScegliAuto



How to replace the key battery of a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Let's start by inserting the tip of a slotted screwdriver into the slot on the side of the key of our Toyota Yaris, and then leverage. After that, we
Replacement of the battery of the Toyota Yaris 1.3 VVT-I
Toyota Yaris (2005-2011 / Xp90) The following steps will show us the process of disassembly and replacement of the battery of the Toyota Yaris 1.3 VVT-I. First, we open the hood of
Toyota Yaris VVT-i battery replacement
Toyota Yaris (2005-2011 / Xp90) Let's see in this video how to remove and replace the battery on a second series Toyota Yaris VVT-i, following these simple instructions. First of al

Other guides that may interest you

    Frequently Asked Questions

    • Yaris 2020-2027 - Where is the Toyota Yaris Hybrid battery located? Read Answer

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos