Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Aygo
  6. : Removal of ignition cylinder on Toyota Aygo

Toyota Aygo - Video tutorial

Model: Toyota Aygo Ab10, MK 1 - Years 2005-2014
Part: Key
Operation: Removal of ignition cylinder on Toyota Aygo

This operation is the same that must be performed on Citroen C1 and C3 produced in the same years. Perform this operation with the battery disconnected for safety reasons. First, remove the plastic around the ignition of the ignition and engine. To remove the cylinder relating to the insertion of the ignition key you will have to insert the key itself, rotate it and unscrew the small hidden screw located under the cylinder itself. Then remove the pin that reaches the block from the top, pressing on the tab and using a screwdriver if anything.


Posted on 31 December 2023 by ScegliAuto



How do you remove the Toyota Aygo rear bumper?
Toyota Aygo (2005-2014 / Ab10, MK 1) The removal of the rear bumper of the Toyota Aygo is done by opening the tailgate, so that the two screws that are positioned immediately below the t
How do you remove the Toyota Aygo headlight?
Toyota Aygo (2014-2023 / MK 2, Ab40) Removal of the Toyota Aygo headlight is done by first removing the bumper completely by unscrewing its fixing screws. These screws are located at the
How to reset the Toyota Aygo service light
Toyota Aygo (2014-2023 / MK 2, Ab40) If the service warning light appears on the display of your Toyota Aygo even though you have already carried out routine maintenance, do not worry be

Other guides that may interest you

How do you open the fuel flap of the Volkswagen Golf 5?

In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism.

Watch the video!


by ScegliAuto

More videos