Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Spark Plugs on Toyota Yaris VVT-i

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Spark plugs

See other generations:
Video tutorial

In this tutorial, you will learn how to remove and replace the spark plugs in a Toyota Yaris VVT-i engine. First, open and lift the bonnet.

Remove the plastic cover by unscrewing the side screws; then disconnect the electrical connectors from the spark plugs by unscrewing the fastening screws and pressing on the tabs. At this point, use a socket wrench with an extension to unscrew the spark plugs; then replace them with new ones of the correct type, screwing them in by hand first before tightening with a spanner (preferably a torque wrench).


Updated on 15 April 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Chain in the Toyota Yaris VVT-I
How to Replace the Timing Chain in the Toyota Yaris VVT-I
Toyota Yaris (2005-2011 / Xp90) Today's guide will show you the procedure to follow to remove and replace the timing chain in the Toyota Yaris VVT-I. First, open the bonnet of your …
How and When to Replace the Timing Chain on the Toyota Yaris XP 90 VVT-I
How and When to Replace the Timing Chain on the Toyota Yaris XP 90 VVT-I
Toyota Yaris (2005-2011 / Xp90) In this video, you will find the main instructions for removing and replacing the timing chain on the Toyota Yaris second series, model XP 90, with a…
Toyota Yaris 1.3 VVT-I Battery Replacement
Toyota Yaris 1.3 VVT-I Battery Replacement
Toyota Yaris (2005-2011 / Xp90) The following steps will show you the process for removing and replacing the battery of the Toyota Yaris 1.3 VVT-I. First, open the bonnet and start …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos