Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Fuses on Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Fuse box

See other generations:
Video tutorial

How do you remove the fuses from a Toyota Yaris? Open the cover and enter the vehicle. Use a plastic lever to remove the cover located on the dashboard under the steering wheel.

Use needle-nose pliers to pull out the damaged fuses in the compartment and replace them with new ones. After this operation, insert the new fuses into the designated slots in the compartment.

Test the correct functioning of the vehicle by turning on the instrument panel with the appropriate key. Replace the fuses found in the engine compartment next to the vehicle's power battery.


Updated on 15 April 2026 by ScegliAuto


Related tutorials

Fuse Diagram and Schema for the Toyota Yaris
Fuse Diagram and Schema for the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Today's instructions will illustrate the positioning of the fuse boxes in the Toyota Yaris, retrieving the schema and diagram of the fuses. First, op…
Fuse Box Layout and Positioning for the Toyota Yaris
Fuse Box Layout and Positioning for the Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) In this guide, we will look at the layout and positioning of the fuse boxes for the Toyota Yaris. First, open the driver's side front door and remove…
Positioning and layout of the fuses in the Toyota Yaris.
Positioning and layout of the fuses in the Toyota Yaris.
Toyota Yaris (2011-2019 / Xp130) In this guide, we will see information regarding the positioning and layout of the fuse boxes of the Toyota Yaris. First, we open the hood of the car…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the Toyota Yaris fuel pump relay located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos