Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper from a Toyota Rav4?

Model: Toyota Rav 4 MK 5, Xa50 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Rear bumper

See other generations:
Video tutorial

To remove the rear bumper from a Toyota Rav4, you need to unclip the four securing clips found inside the wheel arches. Inside, there will also be screws that need to be loosened with an 8 mm and a 10 mm spanner.

Next, unscrew the screws securing the plastic covers underneath the car, allowing the entire outer arch of the wheel to be detached. Now, lift the covers next to the lights to loosen the screws holding them in place.

By removing the lights from their housing, you will be able to unclip all the internal securing clips and completely remove the bumper.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper on a Toyota RAV4
How to Remove the Rear Bumper on a Toyota RAV4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Open the boot lid. Release the fastening clips located inside the boot. Remove the outer cover of the spare wheel, if present, and detach all the riv…
How to Remove the Front Headlamp of a Toyota RAV4?
How to Remove the Front Headlamp of a Toyota RAV4?
Toyota Rav 4 (2006-2013 / Xa30, MK 3) To remove the front headlamp of a Toyota RAV4, you must start by removing the front bumper. This usually requires unscrewing the fixing screws locate…
Replace the Rear Bumper on a RAV4
Replace the Rear Bumper on a RAV4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Is the rear bumper of your RAV4 broken? Here’s how to remove it from the back of the car. Open the boot lid, unscrew the securing bolts located at th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos