Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the Toyota Yaris headlight bulb?

Model: Toyota Yaris Xp10 - Years 1999-2005
Part: Light bulb

In order to replace the Toyota Yaris headlight bulb, you need to open the hood to access the engine compartment: once the hood is open, you will need to remove the protective cap located on the inside of the headlight where the bulb needs to be replaced. This will allow you to extract the bulb from its housing and disconnect it from its connector. Once the old bulb is removed, the new spare part can be connected to the connector and inserted into its housing. At the end of the replacement it will be possible to insert the protective cap of the internal part of the headlight.


Posted on 7 March 2024 by ScegliAuto



How to replace the Toyota Yaris Hatchback headlight bulb?
Toyota Yaris (2020-2024 / MK 4) In order to replace the Toyota Yaris Hatchback headlight bulb, you have to open the hood so that you can access the inside of the corresponding headl
How to replace the Toyota Yaris headlight bulb?
Toyota Yaris (2005-2011 / Xp90) In order to replace the Toyota Yaris headlight bulb, you need to remove the front bumper: to do this, you will need to remove all the rivets located
How do you replace the front headlight bulb of the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) The procedure for replacing the headlight bulb on the Toyota Yaris involves opening the hood to access the components inside the engine compartment:

Other guides that may interest you

    Frequently Asked Questions

    • Yaris 1999-2005 - How do I change the sidelight bulb on the 2002 Yaris? Read Answer

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos