Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a Toyota 4Runner

Model: Toyota 4runner N280 - Years 2010-2024
Part: Service warning light

If you notice the oil warning light coming on when you start the vehicle, don't worry; you can simply reset it to make it disappear. There's no need to directly intervene in the engine compartment, and the cost is practically nothing. Press the ignition button while simultaneously holding down the small button located at the back of the dashboard. Continue to hold it for several seconds until the entire instrument cluster restarts. At this point, release the button. The reset is complete, and the light should be off on the display. You can repeat the entire process without any issues.

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on a Toyota 4Runner
How to Reset the Maintenance Light on a Toyota 4Runner
Toyota 4runner (2010-2024 / N280) .. In this video, you can see how to reset the oil light on a Toyota 4Runner by following a few simple steps that will allow you to.. …
How to repair the radio antenna of a Toyota 4 Runner n 180
How to repair the radio antenna of a Toyota 4 Runner n 180
Toyota 4runner (1996-2002 / N180) In this video we can see how it is possible to repair the reception antenna of one's car that has broken. The video refers to a 1999 Toyota 4 Runner,…
How to Reset the Oil Light on a Toyota 4Runner
How to Reset the Oil Light on a Toyota 4Runner
Toyota 4runner (2010-2024 / N280) If the oil light on your Toyota 4Runner stays on even after changing the fluid and filter, don’t worry because this is completely normal and can be r…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos