Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb of the Toyota IQ

Model: Toyota Iq MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Headlight bulb

Video tutorial

In this guide, follow the main steps to remove and replace the headlight bulb of the Toyota IQ. First, open the bonnet of your car and start by removing the plastic protective cap from the bulbs. Then, disconnect the electrical connector of the bulb to remove it along with the bulb holder, as shown in the video.

At this point, replace the dipped beam bulb with a new one of the correct type (in this case, H11); now refit the bulb into the headlamp assembly, applying the reverse procedure!


Updated on 12 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on a Toyota IQ?
How to Replace the Front Headlight Bulb on a Toyota IQ?
Toyota Iq (2008-2015 / MK 1) To replace the front headlight bulb on a Toyota IQ, open the bonnet to access the components inside the engine bay. Specifically, detach the cover lo…
How to Replace the Front Headlight Bulb of the Toyota IQ?
How to Replace the Front Headlight Bulb of the Toyota IQ?
Toyota Iq (2008-2015 / MK 1) To replace the front headlight bulb of the Toyota IQ, open the bonnet to access the components inside the engine bay: here you will find the internal…
Where are the fuses located in the Toyota iQ?
Where are the fuses located in the Toyota iQ?
Toyota Iq (2008-2015 / MK 1) On the Toyota iQ, each of the fuse boxes is responsible for containing the fuses that regulate the operation of the devices installed on the vehicle.…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos