Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Iq
  6. : How to replace the Toyota IQ headlight bulb?

Toyota Iq - Video tutorial

Model: Toyota Iq MK 1 - Years 2008-2015
Part: Headlight bulb
Operation: How to replace the Toyota IQ headlight bulb?

In order to replace the Toyota IQ headlight bulb, you need to open the hood, so that you can have access to the components located inside the engine compartment. In particular, it will be necessary to remove the cover located in the internal part of the headlight, so that the bulb placed inside it can be extracted and disconnected from its connector. In this way it will be possible to connect the new bulb to the connector, inserting it inside its housing in the headlight. Finally, it will be necessary to close the rear part of the optical group with the special circular cover.


Posted on 14 November 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos