|
Do it yourself
| |||
| ||||
How to Replace the Air Filter on the Toyota Highlander
Model: Toyota Highlander
Xu40
- Years:
2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
To replace the air filter on your vehicle, follow these steps: open the bonnet, locate the box containing the filter at the top, and first disconnect the power connector of the air pressure sensor found at the end of the air intake hose. Identify the securing screws of the cover of the box containing the filter and undo them with a ratchet spanner. At this point, lift the cover of the box and remove the filter. Take the new filter and place it in the housing (always check that the filter specifications are suitable for your vehicle), then reposition the cover of the filter box and tighten the screws again. Finally, reconnect the power connector of the air pressure sensor.
Updated on 16 May 2026 by ScegliAuto
Related tutorials
Toyota Highlander
(2008-2013 /
Xu40)
To replace the air filter on the Toyota Highlander, open the bonnet to access the engine bay, specifically at the top just below the windscreen on th…
Toyota Highlander
(2001-2007 /
Xu20)
In this video, follow the steps to remove and replace the engine air filter of the Toyota Highlander Xu 20 with a V6 engine. First, open the bonnet a…
Toyota Highlander
(2014-2019 /
Xu50)
In this tutorial, you will see how to replace the air filter in the Toyota Highlander, a very simple and quick operation. After obtaining the correct…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.033
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
