Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Seatbelt Alarm on the Toyota Avensis

Model: Toyota Avensis T250, MK 2 - Years 2003-2008

This guide provides instructions to disable the seatbelt warning light and alarm on the Toyota Avensis; remember that the seatbelt must be worn at all times while driving. Get into the vehicle and turn on the ignition; then switch off the ignition and press the button on the instrument panel for about ten seconds, as shown in the video. Now insert the seatbelt and wait for the seatbelt warning light to turn off; finally, turn the ignition back on and start the engine!

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Disable the Seatbelt Chime on a Toyota Avensis?
How to Disable the Seatbelt Chime on a Toyota Avensis?
Toyota Avensis (2003-2008 / T250, MK 2) To disable the seatbelt chime on a Toyota Avensis, turn on the ignition. Press and hold the button located on the left side of the instrument panel f…
How do you replace the V-belt of the Toyota Avensis?
How do you replace the V-belt of the Toyota Avensis?
Toyota Avensis (2003-2008 / T250, MK 2) In order to replace the serpentine belt of the Toyota Avensis, you need to loosen the screws that secure the right front wheel, so that it is possibl…
Removing Auxiliary Belt on Toyota Avensis VVT-i
Removing Auxiliary Belt on Toyota Avensis VVT-i
Toyota Avensis (1997-2003 / MK 1, T220) In this video, we will see the instructions for removing the auxiliary belt on a Toyota Avensis powered by VVT-i, following these instructions. First…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos