Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aurion
    4. : Toyota Aurion fuse box

Toyota Aurion - Video tutorial

Model: Toyota Aurion Xv50 - Years 2011-2017
Part: Fuse box
Operation: Toyota Aurion fuse box

On this car there are two fuse boxes the first is positioned inside the passenger compartment on the left side of the dashboard in the right-hand drive version, and is positioned behind the glovebox and to access it it is necessary to remove the drawer . While the other fuse box is located in the engine compartment on the right side and is also covered by a protective plastic panel. If we need to identify a protection fuse for a specific electrical component, we must refer to the use and maintenance manual where the complete diagram is present.


Posted on 13 May 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos