Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Toyota Corolla

Model: Toyota Corolla MK 5, E210 - Years 2019-2026
Part: Tire pressure warning light

If you have recently checked the correct pressure of the tyres, but your Toyota Corolla continues to show the warning light, you will need to perform a reset. Turn on the ignition while keeping the engine off. Using the buttons located on the left side of the steering wheel, navigate through the menu options on the display to the right of the dashboard, next to the odometer. Select the "VEHICLE SETTINGS" option by pressing the "OK" button. Now select the "TPWS" option; a caution message will be displayed; go back using the button on the left side of the steering wheel and press "OK" again. Select "set tyre pressures" and then, while holding down "OK", reset. Only perform this procedure if you are sure that the current pressure of all four tyres is correct.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on a 2017 Toyota Corolla
How to Reset the Tyre Pressure Light on a 2017 Toyota Corolla
Toyota Corolla (2013-2019 / MK 4, E170, E160) In this video, you will see how to reset the tyre pressure light that appears on the instrument panel of a 2017 Toyota Corolla; before performing thi…
How to Check and Reset the Tyre Pressure Light of the Toyota Corolla
How to Check and Reset the Tyre Pressure Light of the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) In this guide, you will discover how to check and then reset the tyre pressure light of the Toyota Corolla; before registering the TPMS sensors, it i…
How to reset the tire pressure light on a Toyota Corolla?
How to reset the tire pressure light on a Toyota Corolla?
Toyota Corolla (2019-2026 / MK 5, E210) To reset the tire pressure warning light on a Toyota Corolla, turn on the instrument panel without starting the engine. Locate the tire pressure rese…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos