Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pump on the Toyota Camry?

Model: Toyota Camry Xv10 - Years: 1991, 1992, 1993, 1994, 1995, 1996
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the brake pump on the Toyota Camry, open the hood and access the engine compartment, locating the pump at the rear of the compartment, just under the windshield. Once located, you will need to remove all the bolts securing it to its housing and disconnect the related connectors.

This way, the old pump can be removed and replaced with a new replacement part. After installation, you can reinstall all removed parts, close the hood, and check that everything functions correctly.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Pump on a Toyota Camry V6
How to Replace the Fuel Pump on a Toyota Camry V6
Toyota Camry (2006-2013 / Xv40) In this brief guide, learn how to remove and replace the fuel pump on a Toyota Camry V6 by following the instructions below. First, access the rear o…
Where is the fuel pump located in the Toyota Camry?
Where is the fuel pump located in the Toyota Camry?
Toyota Camry (2011-2019 / Xv50) In this video we can see where the fuel pump is located in the Toyota Camry and how to proceed in case we need to replace it, a very simple and quick…
How to Replace the Windshield Washer Nozzle on a Toyota Camry
How to Replace the Windshield Washer Nozzle on a Toyota Camry
Toyota Camry (2002-2006 / Xv30) To replace the windshield washer pump on a Toyota Camry, loosen the bolts securing the right front wheel so it can be completely removed. After remov…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos