Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery of the Toyota CH-R

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

See other generations:
Video tutorial

To replace the key battery of the Toyota CH-R, start by sliding the tab at the bottom of the remote to remove the key blade. Once the key blade is removed, use a plastic lever to split the two halves of the remote.

With the remote open, lift the buttons to reveal the battery, and remove the old battery using your hands. Now take the new battery, remove it from its packaging, and insert it in place of the old battery.

After inserting the new battery, reposition the buttons of the remote in the same way they were before (with the battery attached to the other half). Once the buttons are back in place, snap the halves of the remote together until you hear a click, and reinsert the key blade.

Finally, test the new battery.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to replace the battery of the 2019 Toyota C-HR key.
How to replace the battery of the 2019 Toyota C-HR key.
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) The battery model for the 2019 Toyota C-HR remote control is CR2032, available with the Panasonic and Duracell brands and can be purchased online or …
How to Replace the Battery in a Toyota C-HR
How to Replace the Battery in a Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Today’s steps will guide you on how to remove and replace the battery in a Toyota C-HR by following these simple instructions. First, open the bonnet…
How to Replace the Key Battery for the Toyota C-HR
How to Replace the Key Battery for the Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) If you need to replace the battery in your Toyota C-HR key yourself, follow the procedure described below step by step. First, purchase a new button …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos