Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery on a Toyota RAV4?

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

See other generations:
Video tutorial

Replacing the remote battery on a Toyota RAV4 is a very simple operation; let's see how to proceed in this tutorial. You will only need a flat-head screwdriver and a replacement CR2016 battery.

First, insert the screwdriver tip into the slot on the plastic ring, lever it open, and unlock the two halves of the remote. Extract the inner part and open it again with the screwdriver.

At this point, remove the old battery and insert the new one, ensuring the positive terminal is facing up. Finally, reassemble everything following the reverse procedure.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery of the Toyota RAV 4
How to Replace the Remote Battery of the Toyota RAV 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) Follow these simple steps to disassemble and replace the battery of the Toyota RAV 4 remote. First, take your remote and start by removing the plasti…
Replacing the Remote Battery on a Toyota Rav 4
Replacing the Remote Battery on a Toyota Rav 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) This guide shows you how to replace the battery in the remote control of a third-generation Toyota Rav 4. First, extract the physical emergency key b…
Replacing the Remote Battery of the Toyota RAV 4
Replacing the Remote Battery of the Toyota RAV 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Briefly follow the procedure to disassemble and replace the battery of the key remote for the Toyota RAV 4. First, take the remote in hand and start …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos