Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Anti-Roll Bar Links on a Toyota Highlander

Model: Toyota Toyota Various
Part: Anti-roll bar

Video tutorial

To change the anti-roll bar links, start by loosening the nuts, raising the car, and fully unscrewing the nuts. Remove the cap with the emblem, spray lubricant on the hub and wheel bolts, then fit one upper nut and one lower nut. Tap the lower part of the tyre and remove the wheel.

Spray lubricant on the anti-roll bar link nuts. Using a Torx key to hold the bolt, use a spanner to unscrew the nut. If the nut does not unscrew, hold the bolt thread with a locking pliers and unscrew the top nut. Repeat the same operation for the bottom nut. Remove the old link, fit the new link starting with the lower bolt and then the upper bolt.

Reattach the new link using the locking pliers and spanner, then refit the wheel, screw on the nuts without tightening, lower the car, tighten the nuts, and replace the cap with the emblem. Repeat this operation on the other side.


Updated on 5 June 2026 by ScegliAuto


Related tutorials

Resetting the Tyre Pressure Warning Light on Toyota Highlander
Resetting the Tyre Pressure Warning Light on Toyota Highlander
Toyota Toyota Various In this video tutorial, you will see how to reset the tyre pressure warning light on a Toyota Highlander; before performing the reset operation, it i…
How to Change the Headlight of the Toyota Highlander
How to Change the Headlight of the Toyota Highlander
Toyota Toyota Various To change the headlight of a Toyota Highlander, start by opening the bonnet and keeping it raised. To remove the front grille, there are 4 clips on t…
How to replace the key battery of the Toyota Vitz
How to replace the key battery of the Toyota Vitz
Toyota Toyota Various If your Toyota Vitz key has suddenly stopped working, don’t worry as replacing the battery inside will quickly and economically resolve the issue. Fi…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos