Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on the Toyota Highlander

Model: Toyota Highlander Xu40 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Tire pressure warning light

See other generations:
Video tutorial

If you have just inflated all the tyres on your Toyota Highlander (2008-2013) but the warning light continues to illuminate at each start, you must proceed with the manual reset. Fortunately, this is a very simple operation that anyone can perform.

First, insert the key and turn on the ignition of your car. Next, locate the "Tire set" button at the lower area of the dashboard. Press it once to force the tyre sensor to perform a new reading, then turn off and restart the ignition to complete the procedure.


Updated on 5 June 2026 by ScegliAuto


Related tutorials

Reset of the tire pressure warning for the Toyota Highlander.
Reset of the tire pressure warning for the Toyota Highlander.
Toyota Highlander (2001-2007 / Xu20) The steps outlined in this guide will allow us to reset the tire pressure warning for the Toyota Highlander. Before performing the reset of the TPMS …
How to Calibrate the TPMS Sensors on the Toyota Highlander
How to Calibrate the TPMS Sensors on the Toyota Highlander
Toyota Highlander (2014-2019 / Xu50) In this guide, you will find instructions to perform the calibration of the TPMS sensors on the Toyota Highlander. First, get into the vehicle and co…
How to Reset the Service Light on a Toyota Highlander?
How to Reset the Service Light on a Toyota Highlander?
Toyota Highlander (2020-2026 / Xu70) You can completely clear the Service light displayed on the instrument cluster of the Toyota Highlander by turning on the instrument panel, inserting…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos