Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Rush
  6. : How to install a DIY Dash Cam on the Toyota Rush

Toyota Rush - Video tutorial

Model: Toyota Rush J300, F800 - Years 2017-2024
Part: Checks and maintenance
Operation: How to install a DIY Dash Cam on the Toyota Rush

As the video shows, in order to install a dash Cam on your Toyota Rush rearview mirror, you will need to purchase the necessary kit. The Dash Cam will be placed on the mirror and held by means of plastic cords. There are various sizes in these kits so choose the one that suits you best. Attach the wire with the cigarette lighter end and the other wire that will record the images. Pass the cigarette lighter cable through the bodywork as shown in the video. The other cable will have to be pulled out to the rear door of the car. Mount the camera above the license plate and make the connections.


Posted on 3 August 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos