Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : How to disassemble the float in the Toyota Corolla?

Toyota Corolla - Video tutorial

Model: Toyota Corolla MK 1 - Years 1995-2002
Part: Fuel pump
Operation: How to disassemble the float in the Toyota Corolla?

In this tutorial we can see how to disassemble the float in the Toyota Corolla, a very simple operation, but which requires disassembling the fuel pump since the two elements are directly connected. First of all disconnect the battery negative pole, then lift the rear seat and remove the pump protection cap. Next, we disconnect both the power connector and the fuel pipe, unscrew all the fastening bolts with an 8mm wrench and extract the pump. At this point we can remove the float, insert the spare part and recompose everything following the reverse procedure.


Posted on 2 December 2022 by ScegliAuto



How to replace the float in the Toyota Corolla?
Toyota Corolla (1995-2002 / MK 1) Replacing the Toyota Corolla float is very simple, let's see how to proceed in this tutorial. This operation involves the disassembly of the fuel pum
Replacement of the fuel pump of the Toyota Corolla.
Toyota Corolla (2013-2019 / MK 4, E160, E170) Let's see how to disassemble and replace the fuel pump of the Toyota Corolla, following the instructions below. First, we open the rear doors and sta
How do you disassemble the Toyota Corolla dashboard?
Toyota Corolla (2006-2013 / MK 3) In order to disassemble the Toyota Corolla dashboard, you must first open the glove box on the passenger side, so that the latter is completely remov

Other guides that may interest you

How to open the seat of a scooter without the key

If we have to open the saddle on a scooter when we do not have the key, we can find the necessary information and useful information on how to move in the description below and also in the video. The saddle is normally opened by inserting the key in the dashboard and pressing the appropriate control. If we do not have the key available, we can still open it by removing the panel which is placed immediately under the saddle where we rest our feet and intercept the opening cable and then pull it manually. This way the saddle will open.

Watch the video!


by ScegliAuto

More videos