Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Float in a Toyota Corolla?

Model: Toyota Corolla MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Fuel pump

See other generations:
Video tutorial

Replacing the float in a Toyota Corolla is very simple. Let's see how to proceed in this tutorial.

This operation involves removing the fuel pump as the two elements are directly connected. Start by disconnecting the negative terminal of the battery to work safely.

Next, remove the rear seat and open the central cap. Then disconnect both the power connector and the fuel line, undo all the screws around the perimeter, and extract the pump from the tank. At this point, you can replace the float and reassemble everything by following the reverse procedure.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Float in a Toyota Corolla?
How to Remove the Fuel Float in a Toyota Corolla?
Toyota Corolla (1995-2002 / MK 1) In this tutorial, you will see how to remove the fuel float in a Toyota Corolla. This operation is very simple but requires the removal of the fuel p…
Replacing the Fuel Pump on a Toyota Corolla
Replacing the Fuel Pump on a Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Follow these instructions to remove and replace the fuel pump on a Toyota Corolla. First, open the rear doors and begin by removing the rear seat. Ne…
How to replace the fuel pump of the Toyota Corolla.
How to replace the fuel pump of the Toyota Corolla.
Toyota Corolla (2000-2007 / MK 2) Let's discover the useful instructions on how to disassemble and replace the fuel pump of the Toyota Corolla in simple steps. First, we open the rear…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos