Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform DIY Maintenance on a Toyota Camry

Model: Toyota Camry Xv50 - Years 2011-2019
Part: Oil filter

In this video, you will learn the steps to perform DIY maintenance on a Toyota Camry. The first recommended check is to rotate the tires every 10,000 miles to extend their lifespan. Next, approximately every 12,000 miles, change the engine oil by draining the old oil and replacing it with new oil suitable for your vehicle's engine. Every 20,000 miles, it is advisable to change the cabin air filter located behind the glove compartment on the passenger side, and the air filter in the engine compartment just above the battery by removing the mounting screws. At around 120,000 miles, have the timing belt checked. Finally, regularly check the tire pressure, the condition of the wiper blades, and the coolant level to top off.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the maintenance light on the Toyota Camry
How to reset the maintenance light on the Toyota Camry
Toyota Camry (2006-2013 / Xv40) The procedure to apply in order to successfully carry out the manual reset of the maintenance light on the instrument panel of your Toyota Camry is i…
How to Reset the Maintenance Light on the 2007 Toyota Camry
How to Reset the Maintenance Light on the 2007 Toyota Camry
Toyota Camry (2006-2013 / Xv40) In this new mini guide dedicated to your 2007 Toyota Camry, learn how to manually reset the maintenance light that appears on the instrument panel. F…
How to Reset the Maintenance Light on the 2025 Toyota Camry
How to Reset the Maintenance Light on the 2025 Toyota Camry
Toyota Camry (2018-2024 / Xv70) To correctly complete the manual reset procedure for the maintenance light on your latest model Toyota Camry (2025), follow the steps in this guide. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos