Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Engine Oil on the Toyota Aurion

Model: Toyota Camry Xv50 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

See other generations:
Video tutorial

To change the engine oil and oil filter on this Japanese vehicle in a DIY manner, follow the instructions and tips provided below. You can also view images from the tutorial video.

Once you open the hood, remove the fill cap. Then, lift the vehicle to locate the drain plug and proceed to unscrew it after placing a container on the ground to collect the oil. Next, use the appropriate wrench to unscrew the oil filter and replace it with a new one after lubricating and replacing the gasket.

Finally, close the oil drain plug and return to the engine bay to fill the system with new oil.


Updated on 22 July 2026 by ScegliAuto


Related tutorials

Checking Engine Oil and Transmission Fluid on a 2006-2009 Toyota Camry 2.4
Checking Engine Oil and Transmission Fluid on a 2006-2009 Toyota Camry 2.4
Toyota Camry (2006-2013 / Xv40) The video shows how to check the engine oil and transmission fluid on a 2006-2009 Toyota Camry 2.4. It is a very simple operation that can be done by…
How to Change the Engine Oil Filter in a Toyota Camry
How to Change the Engine Oil Filter in a Toyota Camry
Toyota Camry (2011-2019 / Xv50) To change the engine oil filter in a Toyota Camry, lift the front of the vehicle using a jack and place safety stands. Position a container under the…
How to Replace the Oil and Oil Filter on a Toyota Camry
How to Replace the Oil and Oil Filter on a Toyota Camry
Toyota Camry (2018-2024 / Xv70) To replace the oil and oil filter on a Toyota Camry, lift the front of the car. Remove the upper engine cover, take out the dipstick, and use a 14 mm…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos