Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil and Oil Filter on a Toyota Camry

Model: Toyota Camry Xv70 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Engine oil

See other generations:
Video tutorial

To replace the oil and oil filter on a Toyota Camry, lift the front of the car. Remove the upper engine cover, take out the dipstick, and use a 14 mm wrench to remove the oil filler cap, allowing the oil to drain into a container. While the oil is draining, use the appropriate wrench to remove the oil filter, letting the oil drain into a container.

After draining the oil, clean the area around the drain plug and the filter. Reinstall the oil drain plug and the new oil filter (after applying some new oil to the gasket of the new filter).

Lower the car, go to the engine, insert a funnel into the oil filler hole, and pour in the specified quarts of oil. When you are close to the indicated amount, check the level with the dipstick (the level should be checked the second time you pull out the dipstick).

If the level is at the "max" mark, the operation is complete; otherwise, top off as needed.

Finally, close the filler cap and reposition the upper engine cover.


Updated on 27 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil Filter in a Toyota Camry
How to Change the Engine Oil Filter in a Toyota Camry
Toyota Camry (2011-2019 / Xv50) To change the engine oil filter in a Toyota Camry, lift the front of the vehicle using a jack and place safety stands. Position a container under the…
Oil Change on a Toyota Camry
Toyota Camry (2011-2019 / Xv50) In this tutorial video, discover how to change the oil on a Toyota Camry. The model shown in the video is a 2012 with a 2.5-liter 4-cylinder engine. …
How to Change the Engine Oil in a Toyota Camry
How to Change the Engine Oil in a Toyota Camry
Toyota Camry (1997-2001 / Xv20) Open the oil cap. Lift the vehicle on a lift and place a catch basin under the vehicle. Now open the drain plug and let the old oil completely drain …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos