Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Wheel Hub Bearing

Model: Toyota Avensis MK 1, T220 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Bearing

See other generations:
Video tutorial

To replace the front wheel hub bearing, it is preferable to completely dismantle the hub for easier work on the bench: once the vehicle is lifted, remove the wheel, the brake caliper with its support, disconnect the tie rod end from the steering box and the suspension wishbone, undo the mounting bolts of the shock absorber and extract the driveshaft.

Once the hub is completely disassembled and placed on the bench (possibly secured in a vice), detach the retaining circlip of the bearing, extract the old bearing using a press, and insert the new one in the same manner (alternatively, you can make a puller with a sleeve and a threaded rod); reapply the circlip and proceed in reverse for the installation back onto the vehicle.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Replacing Front Brake Pads and Disc
Replacing Front Brake Pads and Disc
Toyota Avensis (2003-2008 / T250, MK 2) To replace the brake pads and disc, first remove the wheel and lift the vehicle according to safety regulations. Next, unscrew the two bolts to remov…
Replacement of Front Brake Pads
Replacement of Front Brake Pads
Toyota Avensis (2003-2008 / T250, MK 2) Lift the vehicle on suitable axle stands and remove the front wheel. Then, unscrew the lower caliper mounting bolt only and use the upper one as a hi…
Replacement of Front Wheel Bolts
Replacement of Front Wheel Bolts
Toyota Avensis (2003-2008 / T250, MK 2) Lift the vehicle and secure it. Remove the wheel and carefully detach the caliper by removing the two retaining bolts with a ratchet spanner. Remove …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos