Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Differential Oil in the Toyota RAV4?

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Wheel spacers

In this tutorial, you will see how to change the rear differential oil in the Toyota RAV4, a very simple and quick operation. First, lift the car on a ramp or with a jack, taking all necessary precautions. Then, locate the drain plug near the left half-shaft and unscrew it. Once all the oil has drained out, tighten the plug and unscrew the fill plug on the opposite side. Finally, use a pump to add the required amount of oil, tighten the plug securely, and take the vehicle for a test drive.

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Oil Filter and Engine Oil on a Toyota Rav4
Replacing the Oil Filter and Engine Oil on a Toyota Rav4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) In this video tutorial, you will learn how to remove and replace the oil filter of a Toyota Rav4 while also replacing the engine oil. First, open the…
Replace the Rear Wiper on the Toyota Rav4 MK5
Replace the Rear Wiper on the Toyota Rav4 MK5
Toyota Rav 4 (2019-2026 / Xa50, MK 5) In today's tutorial, you will learn how to remove and replace the rear wiper on the fifth generation Toyota Rav4, following the instructions below. F…
Replacing the Rear Light of the Toyota RAV4
Replacing the Rear Light of the Toyota RAV4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) Below are the main instructions for removing and replacing the front light and its bulbs of the Toyota RAV4. First, open the rear tailgate and start …

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos