Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Alternator on a Toyota RAV4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Alternator

To replace the alternator on a Toyota RAV4, remove the front left wheel of the vehicle, which will also require removing the inner cover of the wheel arch. Once these parts are removed, disconnect the alternator by removing its connectors, securing screws, and moving the serpentine belt. After it has been removed, extract the alternator from the top of the engine bay to insert the new part. Secure it with the screws and reconnect the connectors, then reassemble all previously removed components.

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Alternator on a Toyota Rav 4?
How to Replace the Alternator on a Toyota Rav 4?
Toyota Rav 4 (2006-2013 / MK 3, Xa30) To replace the alternator on a Toyota Rav 4, open the bonnet to access the screws securing the cover at the front of the engine bay. Once this is rem…
How to disassemble the alternator of the Toyota RAV 4 2.0 VVT-I
How to disassemble the alternator of the Toyota RAV 4 2.0 VVT-I
Toyota Rav 4 (2006-2013 / MK 3, Xa30) The instructions in this guide will show us how to disassemble and replace the alternator of the Toyota RAV 4 2.0 VVT-I. First, let's open the vehicl…
How to Replace the Alternator in a Toyota RAV4
How to Replace the Alternator in a Toyota RAV4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) This tutorial shows how to replace the alternator in a Toyota RAV4, a simple operation that requires good manual skills. First, ensure the engine is …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos