Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the coolant in a Toyota Corolla 1.8L

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Antifreeze coolant

This guide provides instructions on how to drain and top up the coolant in a Toyota Corolla in simple and quick steps. First, lift the vehicle and start disconnecting the coolant hose located under the engine, allowing it to drain into a container for about ten minutes; then reconnect the hose and unscrew the cap of the coolant reservoir, as shown in the video. Now, top up with new antifreeze fluid suitable for your radiator, filling up to the maximum level mark!

Updated on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Service reset on a Toyota Corolla
Service reset on a Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) In this very short guide, we will see how to reset the service on a fifth generation Toyota Corolla, model produced from 2019 onwards. Let's start th…
How to adjust the time in the Toyota Corolla?
How to adjust the time in the Toyota Corolla?
Toyota Corolla (2019-2026 / MK 5, E210) In this tutorial we can see how to adjust the time in the Toyota Corolla, an extremely simple and quick operation, to be carried out for example afte…
How to replace the battery in the Toyota Corolla?
How to replace the battery in the Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) In this tutorial, we can see how to replace the battery in the Toyota Corolla, a very simple and quick operation. First of all, make sure that the ke…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos