Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Auris
    4. : Where is the fuse box of the Toyota Auris located?

Toyota Auris - Video tutorial

Model: Toyota Auris E150 - Years 2007-2012
Part: Fuse box
Operation: Where is the fuse box of the Toyota Auris located?

If you own a first-generation Toyota Auris (year 2007-2012) and want to find out where the fuse box of the vehicle is located, then all you have to do is carefully read the following instructions and put them into practice. First of all, reach the driver's seat and make sure your Toyota Auris is turned off. Then, move to the lower part of the dashboard and locate the fuses you were looking for. Next to them, you will also find the OBD port. Finally, we remind you that in case of faults, you must first disconnect the car battery before working on the fuses.


Posted on 7 August 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Auris 2018-2024 - Where are the fuses located in a Toyota Auris Hybrid? Read Answer
    • Auris 2007-2012 - Where is the 2007 Toyota Auris fuse box located? Read Answer
    • Auris 2012-2018 - Where is the cigarette lighter fuse on the Toyota Auris? Read Answer
    • Auris 2012-2018 - Where to find the Toyota Auris fuse diagram? Read Answer
    • Auris 2012-2018 - Where is the cigarette lighter fuse located on the Toyota Auris? Read Answer
    • Auris 2012-2018 - What is the Toyota Auris parking system fuse? Read Answer
    • Auris 2012-2018 - Where is the Toyota Auris cigarette lighter fuse located? Read Answer
    • Auris 2012-2018 - How many amps is the Toyota Auris cigarette lighter fuse from? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos