Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Proace Verso
    4. : How to perform a service reset on a Toyota Proace?

Toyota Proace Verso - Video tutorial

Model: Toyota Proace Verso MK 1 - Years 2016-2023
Part: -board computer
Operation: How to perform a service reset on a Toyota Proace?

In this video tutorial, we can see how it is possible to reset the service in a Toyota Proace by following some simple steps: the first thing to do is to perform vehicle maintenance such as changing the engine oil and filters. The next step is to get inside the car, turn off the engine, and engage the handbrake. Turn on the car, then press the button located below the speedometer (the rightmost button), hold it down and while holding down the button, turn off the car and only turn on the dashboard without starting the engine. Now you will see a countdown timer from 10 to zero, hold the button down for the entire duration of the timer, then you will see that the wrench indicator has disappeared.


Posted on 12 September 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos