Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Prius
    4. : To reset the oil indicator on the 2010 Toyota Prius.

Toyota Prius - Video tutorial

Model: Toyota Prius Xw30, MK 2 - Years 2009-2015
Part: Instrument cluster
Operation: To reset the oil indicator on the 2010 Toyota Prius.

To manually reset the engine oil light on your second-generation Toyota Prius (year 2010), simply follow the procedure described in the following mini guide. First, make sure you are in the driver's seat and ensure that the ignition is turned off. Immediately after, locate the "Km/h Mph" button located to the right of the dashboard and hold it down along with the power button. Start the instrument panel and wait for the oil light reset to complete. Once completed, you can release the "Km/h Mph" button, and the procedure is successfully finished.


Posted on 1 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Prius 2009-2015 - What to do when the red triangle light comes on on Toyota Prius? Read Answer
    • Prius 2016-2023 - What to do when the red triangle VSC warning light comes on on Toyota Prius? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos