Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Box Diagram for a Toyota Sienna

Model: Toyota Sienna Xl20 - Years 2004-2010
Part: Fuse box

This brief video guide shows all the diagrams for the two fuse boxes located within the Toyota Sienna, first generation model produced from 2004 to 2010. These diagrams accurately display the name, position, and operating amperage of each relay and fuse. The video also shows the locations of the fuse boxes; let's look at them. The first box is located under the dashboard on the driver's side, while the second is found in the engine compartment on the right, near the battery.

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box on a Toyota Sienna
Where to Find the Fuse Box on a Toyota Sienna
Toyota Sienna (2010-2020 / Xl30) In this new guide for your Toyota Sienna (2010-2020), we will discover where the fuse box is located. The entire operation takes just a few seconds a…
Where are the Fuses Located in a Toyota Sienna?
Where are the Fuses Located in a Toyota Sienna?
Toyota Sienna (2010-2020 / Xl30) In this video, you can see where the fuse boxes are located in a Toyota Sienna and their respective diagrams, useful if you need to check the fuses o…
How to Reset the Tyre Pressure Warning Light on the Toyota Sienna?
How to Reset the Tyre Pressure Warning Light on the Toyota Sienna?
Toyota Sienna (2004-2010 / Xl20) To reset the tyre pressure warning light on the Toyota Sienna, first inflate the tyres to the correct pressure value: this value is indicated on the …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos