Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Land Cruiser
    4. : Where are the fuse boxes located in the Toyota Land Cruiser?

Toyota Land Cruiser - Video tutorial

Model: Toyota Land Cruiser J200, MK 11 - Years 2007-2021
Part: Fuse box
Operation: Where are the fuse boxes located in the Toyota Land Cruiser?

In case we need to work on the electrical components of the Toyota Land Cruiser, it will be useful to know the location of the fuse boxes in order to check their integrity and possibly proceed with replacement if they are broken. The first fuse box is located inside the cabin, in the lower part of the dashboard, under the steering wheel on the left. The second fuse box is located inside the engine compartment, on the right, above the battery, protected by a black plastic cover. To quickly locate the fuse we are interested in, it is helpful to consult the appropriate diagram.


Posted on 15 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Land Cruiser 2007-2021 - Where are the fuses located on the Toyota Land Cruiser d4d? Read Answer
    • Land Cruiser 2007-2021 - Where are the fuse boxes located on Toyota Land Cruiser j150? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos