Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin fan in the Toyota Corolla?

Model: Toyota Corolla E160, E170, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Blower motor

See other generations:
Video tutorial

In this tutorial, you will see how to replace the cabin fan in the Toyota Corolla, a very simple and quick operation. First, ensure that the key is not inserted for safety, then go to the passenger seat and unclip the plastic panel located under the glove compartment.

Next, disconnect the indicated connectors, unclip the wiring from their respective clips, and unscrew the fan screws using a Torx T25 key. At this point, you can remove the fan from its housing and install the replacement.


Updated on 24 August 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan in a Toyota Corolla?
How to Replace the Cabin Fan in a Toyota Corolla?
Toyota Corolla (2013-2019 / E160, E170, MK 4) In this tutorial, you will learn how to replace the cabin fan in a Toyota Corolla, a very simple and quick operation. First, ensure the key is not in…
How to replace the cabin fan in the Toyota Corolla?
How to replace the cabin fan in the Toyota Corolla?
Toyota Corolla (2013-2019 / E160, E170, MK 4) .. In this tutorial we can see how to replace the cabin fan in the Toyota Corolla, an extremely simple and quick operation. First of.. …
Where Are the Fuses on a Toyota Corolla?
Where Are the Fuses on a Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) Any fuse in a Toyota Corolla is located inside one of the two fuse boxes present in the vehicle. The first is found in the lower left area relative t…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos