Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Toyota Auris

Model: Toyota Auris E150 - Years 2007-2012
Part: Engine oil

To change the engine oil in a Toyota Auris, loosen the drain plug of the oil reservoir, located at the bottom of the car, in line with the engine block: once this plug is unscrewed, you can collect all the oil in a suitably positioned container. Additionally, near the front right wheel, you will find the oil filter, which must be removed from its housing and replaced with a new one. After replacement, open the bonnet and top up with the necessary amount of oil.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Oil Filter on a Toyota Auris Hybrid
How to Replace the Oil Filter on a Toyota Auris Hybrid
Toyota Auris (2012-2018 / E180) To replace the oil filter on a Toyota Auris Hybrid, access the underside of the car to locate the engine protection plate. By removing this plate, yo…
Replacing the Oil Filter on a Toyota Auris
Replacing the Oil Filter on a Toyota Auris
Toyota Auris (2007-2012 / E150) Is it time to replace the oil filter on your Toyota Auris? Here’s how to do it. Lift the vehicle on a column lift, unscrew the oil filter housing (us…
Changing the Engine Oil Filter on a Toyota Auris
Changing the Engine Oil Filter on a Toyota Auris
Toyota Auris (2007-2012 / E150) In this video, learn how to change the engine oil filter on a Toyota Auris. First, lift the car on a column lift or jack and use a strap wrench to un…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos