Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Highlander
    4. : How to replace the battery of the Toyota Highlander 2020

Toyota Highlander - Video tutorial

Model: Toyota Highlander Xu70 - Years 2020-2024
Part: Battery
Operation: How to replace the battery of the Toyota Highlander 2020

If you want to safely replace the battery in your 2020 Toyota Highlander, simply follow the steps described in the following guide. Before starting the actual replacement, it is essential to ensure that the vehicle is turned off and safely parked on a flat road. Then, lift the front hood and locate the battery located on the top of the engine compartment. At this point, disconnect the two terminals and unscrew the various screws present. Finally, remove the battery and replace it with a new one. Reconnect the two terminals and screw back the previously removed screws.


Posted on 9 November 2023 by ScegliAuto



How to replace the Toyota Highlander battery
Toyota Highlander (2014-2019 / Xu50) Let's briefly see the instructions on how to disassemble and replace the Toyota Highlander battery, in simple and quick steps. First of all, we open
How to replace the key battery of Toyota Highlander 2019
Toyota Highlander (2014-2019 / Xu50) The procedure necessary to be able to replace the button cell battery contained in the smart key of your 2019 Toyota Highlander in total autonomy is
How to replace the Toyota Highlander remote control battery?
Toyota Highlander (2014-2019 / Xu50) Replacing the Toyota Highlander remote control battery, as we can see in this tutorial, is an extremely simple and fast operation. To do this, we wil

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos