Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on a Toyota Corolla

Model: Toyota Corolla E160, E170, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fuel pump

See other generations:
This video is currently unavailable

Replacing the fuel pump on a Toyota Corolla involves loosening the screws that secure the rear seats in their housing, allowing the bench to be completely removed: once the bench is removed, you can locate the pump underneath. This must now be removed from its housing by loosening the securing screws and disconnecting all power cables: this will allow you to pull out the old pump from its housing, insert the new one, and reassemble all previously removed components.


Updated on 29 August 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Pump on a Toyota Corolla
Replacing the Fuel Pump on a Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Follow these instructions to remove and replace the fuel pump on a Toyota Corolla. First, open the rear doors and begin by removing the rear seat. Ne…
How to Remove and Replace the Fuel Pump in the Toyota Corolla
How to Remove and Replace the Fuel Pump in the Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) Below are the step-by-step instructions to remove and replace the fuel pump in the Toyota Corolla. First, open the rear doors and start by removing t…
How to replace the fuel pump on the Toyota Corolla?
How to replace the fuel pump on the Toyota Corolla?
Toyota Corolla (2000-2007 / MK 2) To replace the fuel pump on the Toyota Corolla, remove the clips located under the rear seat so that it can be completely removed. Underneath, you wi…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos