Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

When to Replace the Timing Chain on the Toyota Auris D-4D

Model: Toyota Auris E150 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Timing belt

See other generations:
Video tutorial

The Toyota Auris powered by D-4D is equipped with a timing chain instead of a belt; in general, the manufacturer guarantees the timing chain for up to 250,000 miles or ten years, so it is necessary to replace it after these timeframes. The procedure for replacing the timing chain requires the disassembly of the main parts of the engine block, including the removal of the cylinder head cover, the timing case, and the alternator; it is necessary to take the necessary references for the timing chain replacement for subsequent timing.


Updated on 2 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Toyota Auris?
How to Reset the Service Light on the Toyota Auris?
Toyota Auris (2012-2018 / E180) To reset the Service light on the Toyota Auris, turn on the ignition by rotating the key in the ignition switch. Once the dashboard is lit, navigate …
How to Replace the Rear Number Plate Bulb on a Toyota Auris?
How to Replace the Rear Number Plate Bulb on a Toyota Auris?
Toyota Auris (2012-2018 / E180) Good morning, to replace the rear number plate bulb on your Toyota Auris, start by opening the tailgate. Now, locate the bulb holder near the number …
How to Set the Time on the Toyota Auris
How to Set the Time on the Toyota Auris
Toyota Auris (2007-2012 / E150) Today's instructions will show you how to change the time on the Toyota Auris by following these simple steps. First, get inside the vehicle and turn…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos