Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform a Full Service on a Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, we will see how to perform a full service on a 2017 Toyota Yaris: first, lift it off the ground, always using a jack. Remove the oil filler cap, placing a container underneath to catch the used oil (which you will dispose of at an authorised centre).

When replacing the cap, always remember to change the gasket; now also replace the filter (which is next to it), keeping the container underneath. Fit the new one in place, lubricating the gasket.

Replace the air filter (from the top) and next to it are the spark plugs; remove them carefully to avoid dropping them into their housing. Refit the filter cover.

Refill the engine oil through the top cap. It is acceptable for the level to be slightly above maximum as the filter will also need to fill. Check the coolant and top it up if necessary, check the windscreen washer fluid, the pollen filter, and the tyre pressure.


Updated on 2 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the 2024 Toyota Yaris
How to Reset the Service Light on the 2024 Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) This guide explains how to independently reset the service light on a 2024 Toyota Yaris without using external tools. To perform the reset, turn on t…
How to Replace the Key Battery of a Toyota Yaris
How to Replace the Key Battery of a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Start by inserting the tip of a flathead screwdriver into the slot on the side of your Toyota Yaris key and lever it open. Then, detach and remove th…
How to Reset the "Service" Light on a Toyota Yaris?
How to Reset the "Service" Light on a Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) To reset the "Service" light on a Toyota Yaris, use the buttons on the steering wheel to access the vehicle settings menu. Once in the menu, select t…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2011-2019 - Can I replace the ignition switch on my Toyota Yaris myself? and how much is it? Read answer
    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos